How to Mount a Server in a Rack?

IT equipment is very expensive. When it comes to servers, prices can reach several thousand dollars. Thus, when buying network hardware, users treat it carefully and fasten reliable to prevent accidental falling and damage.

The installation of a server rack requires preparatory steps, caution during fastening, and ensuring safe storage after mounting. Thus, the server mounting procedure consists of three steps. Let’s consider each stage of how to mount server in rack in more detail.

Do not neglect the preparatory process. Skipping this stage will lead to possible problems during mounting, slow down the process, or be potentially harmful to telecommunications equipment. Pay due attention to the below-mentioned criteria:

Server cabinets have standardized dimensions to accommodate most IT hardware. However, sometimes producers have unique furniture. So, the first thing to do is to make sure that your equipment fits your cabinet. Here, follow the sequence of steps:

Here, remember to leave some extra space for air circulation and hardware cooling and cable routing. Thus, do not chase tight fitting in a 4-post server rack.

If you found out that your hardware and furniture are incompatible during a previous step, search for an adapter that will help achieve perfect fitting.

You definitely know that server racks have specialized holes and slots, which are used for fastening active network equipment, accessories, shelves, and rails, as well as fan mounting. Make sure that the provided holes fit your hardware and are suitable for your system.

Mounting rails and shelves are used to accommodate servers, switches, routers, and other accessories. Make sure that they are placed at the required height and depth to carry devices durably and reliably.

Each of these stages is aimed at preventing fatal mistakes. If you identified some trouble or incompatibility, eliminate problems first, and then go on. Once you’re done with these steps, you’re ready for mounting.

Now, let’s see how to mount a server in furniture correctly. Study all stages properly and then proceed to fasten devices.

Holes on vertical posts are used for mounting hardware. There are many holes places at a distance. Usually, 3 holes take 1 unit. Take off the rails by sliding them outside the rack.

Apply screwdrivers to lose bolts and adjust the height of the rails. First, take screws and insert them into mounting holes of cabinet posts. Attach assemblies. Tighten the screws and check whether it is fastened reliably.

Here, two accessories come in handy. Technicians choose either mounting brackets or chassis brackets. Mounting brackets are found on the front side of the chassis. Chassis are fastened to cabinet bodies with cage nuts to guarantee secure carrying and prevent hardware skewing.

By following this guide, you’ll keep in mind how to rack a server and cope with the task with flying colors.

Make sure to take into account the following caution measures at the stage of planning server cabinet layout:

Hardware mounting in server furniture is an important task. The correctness of fastening influences the reliability of accommodation. Improper installation may lead to damage and losses. The mounting process implies many cautions and steps. If you study this information attentively, you can easily install the server yourself in your home.

But note that before you install equipment, you should pick a proper model. This task is even more important. It means that the preparatory phase requires particular attention and greatly affects the future success and smoothness of system performance.